pad

Click to enlarge

<b>Available in densities ranging from 4-24 analog line circuits</b>



Daytona MM




  • Single slot PCI card
  • Capable of providing combinations of loop start, station and passive/high impedance logging of analog line circuits
  • Available in densities ranging from 4-24 analog line circuits
  • DSP based echo cancellation and RTP packetization available (suitable for analog to IP gateway applications)
  • Advanced DSP based media processing capabilities include PIKA’s AllOnBoard technology (voice, tone, fax, conferencing)
  • H.100 compatible, full on board switching available• Windows and Linux development environments via PIKA’s low and high level APIs
  • Compatible with other popular technologies through PIKA Connect family


Functional Chart
Functionality:/Specifications:
Analog Line Circuits: 4 to 24
Computer Telephony (CT) Bus Type: H.100
Bus Data Rate: (H.100)2, 4, 8 MHzCT
Bus Switch Connections: up to 512 simultaneous half duplex connections can be made between any of the 4096 CT bus timeslots and any of the local timeslots
PC Host Interface Type: PCI (universal signalling)
Maximum V-Engines: 1 (Motorola 56303 DSP based)
DSPs:
On-board DSPs - 1
Chip Type - Motorola 56303 (see note)
Memory - 128 K
Clock Speed - 100 MHz
Instruction Speed - 100 MIPS
Supported Operating Systems:
  • Windows 2000/XP/2003
  • Red Hat 7.3/Enterprise 4
  • SuSE 9.3 distributions of Linux


Note: DSP applications are independent programs that perform operations such as dual tone multi frequency (DTMF) detection, speech compression, conferencing, and speech recognition or tone detection. DSP applications are a key ingredient of the innovative AllOnBoard architecture. The number of supported applications is limited only by the amount of available memory and real time. V-Engine is an add-on expansion card with up to 6 extra DSPs that attach to a high-density Analog Board. V-Engines are used to expand the available signal-processing horsepower for use in DSP applications such as Conferencing, Audio playback/record and Echo Cancellation.




Technical Specifications
PCI Interface:
  • PCI 32 bit target/initiator V2.2 compliant
  • 33 MHz bus speed
Network Interface: 50 pin Amphenol; RJ21 (optional 12 x RJ14 breakout)

Telephony Interfaces:

1. Loop Start Interface (standard mode or passive logging mode)
DC Resistance:
  • North American 330 ohms (@ 20 mA) to 127 ohms (@ 105 mA)
  • European 420 ohms (@ 14 mA) to 89 ohms (@ 150 mA)
DC Loop Current:
  • North American 20 mA to 105 mA (operating range)
  • European 14 mA to 150 mA (operating range)
AC Impedance:
  • North American 600 ohms (off hook), >350 K ohms (on hook)
  • European Complex as per TBR21 spec (off hook), >350 K ohms (on hook)
Supervision:
  • North American Ringing voltage (15.3 - 68 Hz, >= 32 VRMS), loop current disconnect
  • European Ringing voltage (16 - 60 Hz, >=25 VRMS), loop current disconnect
Signaling:
  • Off hook, Flash, DTMF
  • On Hook Audio Detect:
  • Caller ID, DTMF (KT23), Audio Logging
DC Triggering:
  • 3V, 18V, or 33V programmable threshold
2. Station Interface (SLIC):
Current Limiting:
  • Constant at 30 mA AC Impedance:
  • 600 ohms Loop Range:
  • 0-750 ohms @ -24VDC Supervision:
  • Off hook, Flash, Ring Trip, DTMF Signaling:
  • Ringing (externally sourced), Cadence and Power Management Under Software Control Maximum Ringing Load:
  • 2 Ren/line
    Compliance and Capabilities:
    • FCC part 15 and FCC Part 68
    • Industry Canada CS-03
    • CSA C22.2 no. 950 NRTL/C
    • TBR21
    • EU 55022:1998 Class B
    • EU 55024:1998
    • EU 60950:1992
    • 2002 / 95 / EC RoHS 6
    DSPs:
    • Motorola 56303
    • Software reset on per DSP basis
    MTBF:
    • Daytona Baseboard: 68 years
    • Daytona Loop Start Module: 280 years
    • Daytona Station Module: 244 years
    • V-Engine: 144 years
    Power Requirements
    12LC 770mA max @ +5 Volts
    24LC 960mA max @ +5 Volts
    12P1060mA max @ +5 Volts
    24P1540mA max @ +5 Volts
    4LC/8P 960mA max @ +5 Volts
    8LC/16P 1350mA max @ +5 Volts
    MM Series V-engine890mA max @ +5 Volts

    Note: Typical values.
    Environmental Requirements:
    • Operating Temperature: 0C to +60C
    • Storage Temperature: -20C to +85C
    • Humidity: 5 to 95%, non-condensing
    Media Capabilities
    • Play and record
    • DTMF, tone, speech detection
    • DTMF, tone generation
    • Fax
    • RTP, IP/SIP
    • Integration with Asterisk, Envox, Skype technologies


    About PIKA Technologies Inc.

    PIKA Technologies’ reliable media processing building blocks connect computer systems to TDM and IP networks. Brand name companies design groundbreaking IVR, call center, custom PC/IP PBX, fax and logging solutions using PIKA Technologies’ components.

    With two decades of experience in this industry, PIKA was one of the first media processing vendors to move voice processing onto the host, developing reliable algorithms for voice applications in shared environments. PIKA offers a single SDK across its entire product portfolio, and has earned a reputation for market-leading customer and technical support. Headquartered in Ottawa, ON, Canada, PIKA has ranked in The Branham300, an authoritative ranking of successful Canadian high tech firms, for four consecutive years.


    Pika Analog High Density Board - Daytona MM
    PIK-99-70740padRegular price: $1,660.00padSale price: $1,560.00pad
    • BSD Mall




    sales@bsdmall.com     		Phone: +1 (650) 267-5095